Tag: Original Trilogy

I suppose I should have posted the last two Star Wars plates before I took an abrupt sabbatical, but better late than never right?  I drafted these posts back in April and then went into a tailspin of life changes.  The good news is things are finally gradually settling. Not settled, mind you, so my attention is still a little bit in limbo, but I wanted to at least finish these last of the Star Wars Original Trilogy plates and make the vague promise that I am looking to work on the Force Awakens stuff once I can get organized to do so.

So here’s the last of Luke: his final black Jedi outfit from Return of the Jedi. Luke was probably the first hero I ever knew who decked himself like this (and it must have made an impression since I’ve worn black a lot since). I always thought it made a stark contrast to his previous outfits and solidified his maturing into the Jedi role (it’s very “priestly” in a way).

Also included on this plate is Luke’s camo from Endor, his final green lightsaber (after losing the blue one in The Empire Strikes Back–though we all know it’s turned up again since then), and a blaster to go with his stormtrooper outfit because I didn’t have room on the original plate.

Apologies again for the loss of continuity between these plates. I have no good excuse since they were complete when I bailed in April and I had plenty of time this summer to post. I was just massively distracted, I guess. I have a lot of work to do drawing the Force Awakens plates, so it could be a while depending on my new schedule. And I honestly don’t know how many characters I’ll do. No matter how much I wanted to include Darth Vader in the mix, there’s just no dignified way of putting Darth Vader in his underwear, so that’s still a project for another time.

I already have Rey and Kylo Ren drawn, and promised a Hux for a friend. I will likely make heads and costumes for the OT heroes since they already have bodies I can work with. Otherwise, not sure who else I’ll draw. I’d like to do Finn and Poe, but there are other things I want to work on. We’ll see how it all plays out.

Will post the last Leia plate shortly, so look for that!  You can subscribe to this blog or follow me on Twitter @BootsNBats to get updates.

[Click on each image to download a printable .pdf copy of each plate]

To see all Star Wars related posts and plates, click the tag or the category at right. Click the Luke Skywalker tag to see all of Luke’s plates (this is the last).

Today for Force February we have more Luke as he transitions from The Empire Strikes Back to Return of the Jedi. And yes, we’re talking all drab now. Once Luke puts on the black, he pretty much never changes into anything else.

Fortunately, he has some layers to work with including this dark brown cloak he wears in his fist scene confronting Jabba the Hutt, and the black tunic he wears under it (and over the rest of his black suit, which is on the plate that will follow this one).

I also included on this plate, his grey Bespin jacket, which I mentioned yesterday, and his belt and holster, which also goes along with that set. I guess I could have connected the belt to the jacket. I know there was a reason I didn’t at the time, but it’s strangely lost to me now ~ ha!

Just one more plate for Luke tomorrow to close out the other pieces of his Return of the Jedi ensemble. I went with a relatively light black for these outfits because I wanted to make sure the detailing was visible and, once again, deep saturated blacks don’t tend to print well (though printers have gotten progressively better over the years).

Anyway, I really liked Luke in black. I never thought there was any actual danger of him being seduced to the Dark side, so it didn’t freak me out (as apparently it freaked out other people at the time).

Since then, a lot has been made of the fact that the outfit gets disheveled before the end of the film and it’s revealed that the underside of the black fabric is white. That metaphor was also lost on me as a kid, but then I didn’t equate black with evil anyway.

A plate for Leia tomorrow and then I’m doing some reorganizing, but I will definitely finish posting Luke and Leia over the first couple of week of March (maybe change to “Force Friday” until the all the extant plates are done.

Then maybe I’ll go back to working on Dark Vader and/or The Force Awakens plates that I want to do.

[Click on each image to download a printable .pdf copy of each plate]

To see all Star Wars related posts and plates, click the tag or the category at right. Click the Luke Skywalker tag to see all of Luke’s plates.

It’s our final week of Force February (though the plates will continue in into March in some fashion), and we’ve run out of Han Solo, so this week you’ll get a double-dose of Luke Skywalker.

In The Empire Strikes Back, Luke goes through his “grey” phase. Visually the idea was to show Luke’s Dark side inclination by having him dress from light to dark (by Return of the Jedi he’s in full black).

More on that later, but for the moment, here are his two main costumes from the second film and you can see how the Hoth clothes begin the transition from the white/sand colors of Tatooine into a decidedly more grey area.

The second outfit is Luke’s training clothes from Dagobah, over which he wears a matching jacket later on Bespin (which is on the next plate–unfortunately it was too much to squeeze in with these two other outfits, otherwise we would have had a nice clean break between films).

The clothes that Luke and Leia wore in the medbay at the end of The Empire Strikes Back are two costumes I just skipped over because Leia’s basically looks like her first dress and Luke’s is just a hospital robe.

Maybe grey is about as boring as white, but I tried to keep the colors relatively warm (I always thought the Dagobah/Bespin suit was more taupe than grey anyway, but there’s me and my inability to see color again ~ ha!).

As previously mentioned, we’ll get a double dose of Luke this week.  As far as completed plates, I still have one more of Luke after tomorrow and one more for Leia. We’ll see where we go from there. I might pick up with The Force Awakens stuff, but to be honest, beyond finally managing to draw Adam Driver’s face, I haven’t done any of the costumes for those characters!

Also thinking about how I made this blog to talk about other pop culture stuff and haven’t really been doing that in favor of making paper dolls. Which is great, it’s just not the entire reason I started this blog. I don’t know. We’ll see what surfaces in the next few weeks.

[Click on each image to download a printable .pdf copy of each plate]

To see all Star Wars related posts and plates, click the tag or the category at right. Click the Luke Skywalker tag to see all of Luke’s plates.

Well lookie, some actual bona fide color for a change here for Force February!  We’ve finally gotten just about all the whites behind us now, so things should liven up a bit. Leave it to Luke to bring us some bright orange and yellow.

These are the last plates for Luke from A New Hope. He wears the X-wing suit at the end of the movie and then a similar one in The Empire Strikes Back while doing his snow speeder run on Hoth (the snow version is very similar, but padded, so I skipped it).

To be honest, I was dreading drawing the X-wing outfit as it seemed to have a lot of fussy details, but it was actually a lot of fun (straight lines notwithstanding). And then I especially dreaded (and then subsequently enjoyed) making the helmet, which also has some cool details. I’ve always liked the yellow visors on these helmets. I guess I should have made a training helmet with the blast shield down, but there you have it: me and accessories are rather hit or miss.

The costume Luke wears on Yavin for the final awards ceremony in A New Hope is interesting in that we never see him in anything like it ever again ~ ha!

I still have three more plates for Luke to cover the subsequent films (and still potentially one more to add for The Force Awakens). This is also the moment where I realize that I have all the plates for this week done, but haven’t even begun to color the plates for next week (oops!). I got lazy (lulled into a false confidence with my buffer, as always!).

I admit that’s frighteningly true of all my buffers at the moment: the coffers are dangerously low. I’ve got Judy stuff drawn, but not scanned or plated, and I’ll run out of Monday Mayhem plates next week. Guess I need to get on that.

In the meantime, enjoy Luke and the ongoing Star Wars plates. Even if I haven’t colored them all yet, at least they are otherwise finished. Er, at least for these characters they are.

[Click on each image to download a printable .pdf copy of each plate]

To see all Star Wars related posts and plates, click the tag or the category at right. Click the Luke Skywalker tag to see all of Luke’s plates.